References


WRF MILL

WRF Heavy Duo 160

In 1/2022 we handed over to the hungarian customer CNC plate milling machine WRF MILL.

Basic machine parameters:

Travel:

Travel X 8 600 mm

Travel Y 3 500 mm

Travel Z 1 700 mm

Headstock rev 5 000 RPM

Main motor output 53 kW

Control system Heidenhain 640

Accessories:

Highpressure cooling 80 bar

Milling head UHAmi

In 11 / 2021 we handed over to the american customer the machine WRF Heavy Duo after the geometry setting

Basic machine parameters:

Spindle diameter 160 mm

Travel:

X (common bed) 27 000 mm

Y (for both machines) 5 000 mm

Z (for both machines) 1 500 mm

W (for both machines) 1 000 mm

CNC Heidenhain 530

Accessories:

ATC 60, milling head UHA 30 microindex


HCW 2 + S 80A

WHN 13P CNC

In 8 / 2021 we handed over to the czech customer the machine HCW 2 + S 80A.

Basic machine parameters:

Spindle diameter 200 mm

Speed ​​up to 2,500 rpm

Travel:

X 8,000 mm

Y 5,000 mm

Z 1,300 mm

W 1,200 mm

Z + W 2,500 mm

Siemens 840D control system

Accessories:

Rotary table S 80A

Milling heads IFVW 103, IFVW 207

Hungary:

Modernized WHN13PCNC

Handover: 1 / 2021

Basic machine parameters:

Spindle diameter 130 mm

Spindle revolutions up to 3,000 rpm

Travel:

X 3500 mm

Y 2000 mm

Z 1250 mm

W 800 mm

Feedspeed 10 000 mm/min

Siemens 840 Dsl control system


WHN 13P CNC

WHN 13P CNC

Czech Republic:

Modernized WHN13PCNC

Handover: 9 / 2020

Basic machine parameters:

Spindle diameter 130 mm

Spindle revolutions up to 3,000 rpm

Travel:

X 3500 mm

Y 2000 mm

Z 1250 mm

W 730 mm

Table size 1600x1800 mm

Heidenhain TNC 640 control system

Germany:

Modernized WHN13PCNC

Handover: 1 / 2021

Basic machine parameters:

Spindle diameter 130 mm

Spindle revolutions up to 3,000 rpm

Travel:

X 3500 mm

Y 2000 mm

Z 1250 mm

W 730 mm

Heidenhain TNC 640 control system

Accessories:

Reinforcing flange of length 250 and 550 mm


FP 2560

UNION PR160 CNC

Hungary:

New portal FP2560

Handover: 6 / 2020

Basic machine parameters:

X 7500 mm

Y 4700 mm

Z 1550 mm

Table size 2500 x 6000 mm

Table load capacity 20 t

Main engine power 53 kW

Heidenhain iTNC 640 control system

Accessories:

Head UHAmi, Straight head, Robot KUKA 140

Czech Republic:

Delivery and installation of used UNION PR160 CNC machine

Handover: 11 / 2021

Basic machine parameters:

Spindle diameter 162 mm

Spindle revolutions 5 - 2800 rpm

X 11000 mm

Y 3000 mm

Z+W 1500 mm

SIEMENS 840D control system

Accessories: 

Sempuco KFD4 head


WHN 13P CNC

W 200H

Czech Republic:

Modernized WHN13PCNC

Handover: 2 / 2020

Basic machine parameters:

Spindle diameter 130 mm

Spindle revolutions 3000 rpm

X 3500 mm

Y 2000 mm

Z 1250 mm

W 730 mm

Table size 1600x1800 mm

Heidenhain TNC 640 control system


Poland:

Repair of Headstock of the W200H

Handover: 9 / 2019

Repair of the main drive gearbox, including all gears and installation of new bearings.
The bearings of the boring spindle bearings were lubricated.

At the same time, the S100C rotating table plate was geometrically adjusted. 


WFT 13R

SV 32, FN20, BU20

Denmark:

Installation of the WFT13R

Handover: 11 / 2019

Basic machine parameters:

X 5000 mm

Y 2500 mm

Z 1000 mm

W 730 mm

Table top size 1800x2600 mm

Accessories: 

workpiece measuring probe, ATC 40, chip conveyor 

Czech Republic:

Modernization of sv 32 lathe, FN20 milling milling cutter and BU20 round grinder.

Handover: 9 / 2019

The machines were modernized into classrooms of middle school students.


WRF MILL

WFF 130P CNC

Czech Republic:

Installation of the new WRF MILL

Handover: 6 / 2019

Basic machine parameters:

X 8600 mm

And 3500 mm

From 1500 mm

Accessories:
Rotary Table with plate size 2500x3000 mm, 
automatic head UHAmi 30,

Control system Heidenhain 640, robot KUKA

Slovakia:

Modernized WFF130PCNC

Handover: 1 / 2019

Basic machine parameters:

X 3500 mm

Y 2000 mm

Spindle diameter 130 mm

Spindle revolutions 3000 rpm

Table size 1600x1800 mm

Heidenhain iTNC 530 HSCI control system 


Lucas 40T0142

W 160G

USA:

Modernization of machine Lucas 40T0142

Handover: 6 / 2019

Basic machine parameters:

Spindle diameter 130 mm

Cat 50 clamping taper

Spindle revolutions 3000 rpm

X 3650 mm

Y 3050 mm

Z 1820 mm

W 730 mm

Fanuc Oi-MF control system

Accessories: 

ATC 40, measuring probe RMP 60

Austria:

Delivery of modernized upgraded W160G

Handover: 8 / 2018

Basic machine parameters:

X 8000 mm

Y 2900 mm

Z+W 1600 mm

Spindle revolutions 10 - 1200 rpm

Control system Sinumerik 840D sl

Accessories:

High pressure cooling 35 bar, ATC 40, 2 x rotary table 2000x2500 mm with load capacity 25 t, milling heads IFVW2B, IFVW3B, probe RMP60 and chip conveyor.


WD 160 A

Czech Republic:

Modernization of škoda WD 160 A with new Headstock Fermat WRF 160

Handover: 6 / 2018

Basic machine parameters:

X 5800 mm

Y 2000 mm

Z 1200 mm

W 1000 mm

Heidenhain 640 control system

Accessories:

Modernized rotary tables W14, IFVW 2B and 3B milling heads

 


FERMAT CZ